Neevaluat Detalii de evaluare

EVOLVEO Ursus, carcasă mATX, 3 ventilatoare ARGB de 120 mm, panou lateral și panou frontal din sticlă, alb

  • mATX, mITX
  • Tempered glass side and front panels
  • 3x ARGB Infinity Mirror fans
  • Maximum graphics card length: 420 mm
  • Maximum CPU cooler height: 175 mm
  • 1 x USB-A 3.0 port
  • 2 x USB-A 2.0 ports
  • 1 x audio output port
  • 1 x microphone input
Precomandă (ne asteptam 15.01.2027)
370 lei Evaluare preț:
Categorie: Carcasa pc gaming
EAN: 8595683206365
EAN: 8595683206365
Předobjednávka: Ano, În stoc 15.01.2027
Obj.kód: CAE Ursus-WH-3
waranty: 3 ani
znacka
MARCĂ CEHĂ
Dezvoltare în České Budějovice
trh
PE PIAȚĂ DIN 2005
Peste un milion de dispozitive vândute
technologie
TEHNOLOGII CARE AU SENS
Simple, funcționale și fiabile
dod-zadax
TRANSPORT GRATUIT
Pentru achiziții de peste 315 RON

EVOLVEO Ursus-WH-3 Gaming PC Case

The EVOLVEO Ursus-WH-3 gaming PC case will become an unshakable base camp for your hardware setup. Whether you are holding your ground in a fast-paced tactical shooter or exploring vast worlds full of mysteries, its transparent tempered-glass panels reveal the full power of your arsenal in all its glory. An army of fans helps keep your PC cool, while vibrant lighting adds style to every move. A system of mirrors takes the lighting effects to a whole new level. With this case, both your victories and defeats will have a visual backdrop worthy of the intensity of your gaming experience.
The case is designed for a standard ATX power supply and supports both Intel and AMD motherboards. Its dimensions are 220 × 403 × 460 mm.

Keep your cool, even at critical moments

As the action heats up, so do your processor and graphics card. That is why the DoubleFlow system provides natural cooling for the PC case through two airflow paths, at the rear and on the right-hand side.
Cooling is further enhanced by three pre-installed Infinity Mirror fans. Each runs at up to 1,200 RPM to help prevent overheating without unnecessary noise. With a maximum stated fan noise level of 24.5 dB, your focus stays on the game.

Show off your PC at its best

Both the front panel and side panel of this PC case feature 4 mm tempered glass. Like a theatre curtain drawn back, they reveal the stars of the show: your hardware. The special safety glass is designed to break into small pieces rather than sharp shards if damaged.
Thanks to the ClickFix system, the transparent panels are easy to remove, which comes in handy when you need to replace an SSD quickly before an important match.

Room for your hardware

Whether you are building a powerful gaming machine or a compact PC for everyday use, this Mini Tower case provides ample space for all essential components. It supports mATX (Micro ATX) and mITX (Mini ITX) motherboards, graphics cards up to 420 mm long, and CPU coolers up to 175 mm tall. There is also plenty of storage space, with room for two standard 3.5-inch hard drives and one 2.5-inch SSD. You will have ample capacity for games, multimedia and work files.
The robust construction, with 0.66 mm thick steel panels, provides a solid foundation even for a heavyweight graphics card. Four PCI expansion slots make it easy to install sound, network or USB expansion cards to suit your needs. A 22 mm cable-management space helps keep the interior tidy.

Light up your victories

With the EVOLVEO Ursus-WH-3 PC case, every gaming achievement takes place in the spotlight. Multi-ARGB fan lighting, with 22 LEDs in each fan, offers 14 lighting modes, from subtle SlowMotion to dazzling SuperFlash. You can control the lighting using a button on the side control panel, right next to the ON/OFF switch.
Want to share your gaming victories with friends via livestream? Easily accessible integrated audio jacks and USB ports, including a high-speed USB 3.0 connection, make it convenient to connect a microphone, headphones, webcam and other accessories.

Cleanliness and stability as standard

Even the dirtiest tricks in gritty gangster shooters call for clean hardware. That is why the case features two dust filters, one at the top and one at the bottom, with an ultra-fine steel structure that helps keep dust and dirt out of the PC. Both filters are easy to remove, clean and reinstall whenever needed.
Four non-slip rubber feet keep the PC firmly in place, even when the hardware is running at full power. The fans also feature foam anti-vibration pads that help prevent vibrations from being transferred to the case.

Ready to build and upgrade

Is your PC a treasure whose value can keep growing? Then the EVOLVEO Ursus-WH-3 is a chest ready for your ambitions. The package includes everything you need to expand your build over time: various screws for the motherboard, SSD, power supply, HDD and fans, mounting clips for expansion cards, cable ties and even a standoff tool for removing the motherboard. Whether you are installing a new drive or adding another fan, with two available 120 mm fan positions at the bottom and three at the top of the chassis, the necessary accessories are close at hand.
The EVOLVEO Ursus-WH-3 is a reliable partner for gamers, content creators and other PC enthusiasts. Its thoughtful design, effective cooling and easy maintenance make it the centrepiece of your digital world, providing the space and style you have always wanted.

Specifications:

  • Case size: Mini Tower
  • Supported motherboard form factors:
    • mATX (Micro ATX)
    • mITX (Mini ITX)
  • Supported power supply form factor: ATX
  • Transparent removable front panel:
    • Made of 4 mm tempered safety glass (breaks into small, less hazardous pieces without sharp shards if broken)
    • Easy installation and removal using the ClickFix snap-on mechanism
  • Transparent removable side panel:
    • Made of 4 mm tempered safety glass (breaks into small, less hazardous pieces without sharp shards if broken)
    • Easy installation and removal using the ClickFix snap-on mechanism
  • 2 x 3.5-inch HDD
  • 1 x 2.5-inch SSD
  • Maximum graphics card length: 420 mm
  • Maximum CPU cooler height: 175 mm
  • Robust construction (0.66 mm thick steel panels)
  • DoubleFlow system for optimal airflow and natural cooling throughout the case, using two airflow paths through the right and rear sides
  • Supports Intel and AMD motherboards
  • 3 pre-installed Infinity Mirror fans:
    • 1 x Master fan (120 mm)
    • 2 x Slave fans (120 mm)
  • Mirrored fan hub (Infinity Mirror Fan):
    • Captures and reflects the lighting inside the case
    • Enhances lighting intensity through indirect reflection
    • Creates the illusion of more illuminated fans
  • 2 mirrored side panels on the sides of each fan:
    • Capture and reflect the lighting inside the case
    • Enhance lighting intensity through indirect reflection
    • Create the illusion of more illuminated fans
  • Multi-ARGB fan lighting:
    • Fan blades
    • 2 decorative light strips around the blades
    • 2 mirrored fan side panels
  • 22 LEDs per fan for maximum lighting intensity and brightness:
    • 8 LEDs in the central section
    • 14 LEDs around the outer perimeter of the fan
  • 14 ARGB fan lighting modes:
    • ARGB (all colours illuminate and pulse simultaneously)
    • ARGB BreathMotion (rapid pulsing through individual colours in sequence)
    • ARGB MixMotion (rapid pulsing with blended colour transitions)
    • ARGB SlowMotion (slow pulsing through individual colours in sequence)
    • ARGB SuperFlash (all colours flash simultaneously)
    • ARGB QuickFlash (all colours flash simultaneously in the opposite direction)
    • Red
    • Green
    • Dark blue
    • Light blue
    • Yellow
    • Turquoise
    • Pink
    • White
  • 2 sets of 4 foam anti-vibration pads at the fan corners to reduce vibration transfer to the case
  • Pre-installed fan specifications:
    • Hydrodynamic bearing
    • Speed: max. 1,200 RPM
    • Airflow: max. 32.45 CFM
    • Noise level: 24.5 dB
  • Two connection options for the Master fan:
    • To the power supply
    • To the motherboard
  • Pre-installed fan positions:
    • Rear of the case: 1 x 120 mm fan
    • Right side of the case: 2 x 120 mm fans
  • Available positions for additional fans:
    • Bottom of the case: 2 x 120 mm fans
    • Top of the case: 3 x 120 mm fans
  • Control panel on the left side of the case:
    • ON/OFF power switch
    • ARGB fan control button (changes fan lighting colours and enables lighting control via the motherboard)
    • 1 x USB-A port (USB 3.0)
    • 2 x USB-A ports (USB 2.0)
    • 1 x audio output port (3.5 mm jack)
    • 1 x microphone input (3.5 mm jack)
  • 22 mm cable-management space for concealing cables inside the case
  • Optimised, spacious interior for convenient component installation
  • 4 PCI expansion slots for installing expansion cards on the motherboard and providing access to their external ports
  • Bottom dust filter to help prevent dust from entering the case:
    • Protects the power supply and internal components from dust
    • Ultra-fine structure for maximum airflow
    • Ultra-thin 0.35 mm steel sheet
    • Easy removal and installation by sliding it between the guides
  • Top dust filter to help prevent dust from entering the case:
    • Protects internal components from dust
    • Ultra-fine structure (50 holes/cm²) for maximum airflow
    • Ultra-thin 0.35 mm steel sheet
    • Easy installation and removal thanks to magnetic attachment
  • Side air vent on the right side of the case (29 × 11 cm) for optimised airflow
  • Supported top-mounted liquid cooling radiator sizes: 120/140/240/280/360 mm
  • 4 non-slip rubberised feet on the bottom of the case to prevent unwanted movement
  • Comprehensive mounting accessories:
    • Motherboard and SSD mounting screws (14 pcs)
    • Power supply mounting screws (7 pcs)
    • HDD mounting screws (4 pcs)
    • Fan mounting screws (12 pcs)
    • PCIe card mounting clips (2 pcs)
    • Cable ties (5 pcs)
    • Spare brass motherboard standoffs (3 pcs)
    • Auxiliary brass standoff installation/removal tool for motherboard removal (1 pc)
  • Dimensions (W × H × D): 220 × 403 × 460 mm
  • Weight: 5.78 kg

Package contents:

  • PC case
  • Motherboard and SSD mounting screws (14 pcs)
  • Power supply mounting screws (7 pcs)
  • HDD mounting screws (4 pcs)
  • Fan mounting screws (12 pcs)
  • PCIe card mounting clips (2 pcs)
  • Cable ties (5 pcs)
  • Spare brass motherboard standoffs (3 pcs)
  • Auxiliary brass standoff installation/removal tool for motherboard removal (1 pc)
  • User manual (CZ/SK/EN/HU/DE/RO/SI)

As part of ongoing product development, the manufacturer reserves the right to change the design and technical specifications of this model.

Evaluarea produsului

Fiți prima persoană care va posta un articol la acest produs!

Nu completați acest câmp

Cum ați evalua acest produs? Alegeți de la 1 la 5 stele, unde 1 este cea mai proastă și 5 este cea mai bună evaluare.

Verificare de siguranță

Prin trimiterea evaluării sunteți de acord cu condițiile de protecție a datelor personale

Discuție

Fiți prima persoană care va posta un articol la acest produs!

Nu completați acest câmp

Verificare de siguranță

Prin salvarea comentariului sunteți de acord cu condițiile de protecție a datelor personale